Tag - Replacement Windows

Which are Better: Casement or Double-Hung Windows?

There are two main types of sash windows, casement windows and double-hung windows, each have their own advantages and disadvantages. If you are looking to decide between the two, you will need to weigh up the pros and cons before deciding which is best for your space.

What is a Casement Window?

A casement window is a type of sash window that has hinges on the side, where it attaches to the frame. They may open inward or outward, but usually it is outward.

Pros of Casement Windows
Different glazing options
Good ventilation
Many different design options
Can fit to many types of frame

Cons of casement windows
Not suitable for use with air conditioning units
Casement windows are not suitable for storm windows
No potential for adding screens
Some casement window frames will not be strong enough for larger size windows

What is a Double Hung Sash Window?

A double hung sash window is a design with 2 separate sashes, those being the top and bottom window. Both of these slide up and down. If it is a single hung sash window then the top window will be in a fixed position, and only the bottom window will move.

Pros of Double Hung Windows
Easily ventilation and ability to control air flow
Suit traditional and contemporary buildings
Simple to clean inside and outside of the glass
Suitable for air conditioning units and other additions
Wide variety of colours and designs

Cons of Double Hung Windows
Possibility of air leaks, more so in older wooden windows
Fewer options in terms of sizes, in comparison to casement windows
Complex opening and closing mechanisms, which may require maintenance
Mixing double sash windows with other windows can ruin the aesthetic

Read more...
How to Paint Sash Windows

How to Paint Sash Windows | Mortice & Green

Maintaining your sash windows can be tricky, they are traditionally made of wood which means they need to be cleaned and caulked in a certain way, to prevent cracks from forming. One of the most difficult aspects of maintaining them is painting them, as you can easily end up sealing the sash window if you don™t paint them carefully. This guide will give you an idea of how to paint your sash windows properly.

  1. Remove the hardware

The first thing you need to do is remove the hardware such as the handles and locks. Leaving these on the windows will mean they are in the way and could also mean they end up covered in paint. 

  1. Sand down the wood

Painting over old layers of paint is also a bad idea, as eventually the layers of paint will build up so much that the window will stop closing properly. Therefore, you should take the time to sand down the wood and sand off the old layers of paint. Following on from that thoroughly clean your sash windows, to get rid of the dust and debris you created when sanding.

  1. Choose the right paint

Think about what colours will suit your home, also you should bear in mind that if the windows are in the sun a lot the colour may fade, so you might want to go for a brighter colour than you first thought. You could test the colours on a mock frame before committing to painting your sash windows.

  1. Paint the glazing bars

Start the painting process by focusing only on the glazing bars first. You will need to reverse the sashers so that you can access every part of the window. Start with the top sash then leave it to dry and continue with the bottom sash.

  1. Paint the frames

Once you start painting the sash window frames you should also start by painting the top first. Avoid pushing the sash all the way up until the paint is dry, otherwise they will stick. 

  1. Paint the rest of the window frame

Once you have done the glazing bars and the frame you can paint the other parts of the sash windows, such as the cills and casting. Leave the sash windows the dry fully, before you reinstall any hardware elements.

  1. Clean off paint splatters

If you find any paint splatters on your sash windows you can remove these fairly easily with a window scraper. Just make sure you do this gently, applying too much pressure could break or crack the glass.

Read more...